Product ID:BUSAN METAL & WOOD PRIMER, 95
MSDS Date:01/01/1989
FSC:8010
NIIN:00N027235
MSDS Number: BNLQN

EVR-GARD COATINGS CO

16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-531-0131

Cage: 5G582

EVR-GARD COATINGS CO

PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

0.1 @ 68F.

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 100%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:MAY CAUSE HEADACHE & NAUSEA,
DIZZINESS. SKIN:PRIMARILY AN IRRITANT. REDNESS OR RASH.
EYES:PRIMARILY AN IRRITANT. INGEST:NAUSEA, DIZZINESS, HEADACHES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT W/MATERIAL MAY
CAUSE DERMATITIS.

First Aid:INHAL:REMOVE TO FRESH AIR. EYES:FLUSH W/CLEAN WATER FOR @ LST
15 MINUTES. SKIN:REMOVE SATURATED CLOTHING & WASH SKIN W/SOAPY
WATER THOROUGHLY. INGEST:INDUCE VOMIT W/1 OZ OF SYRUP OF IPECAC
FOLLOWED IN 5 MINUTES W/GLASS OF WATER. CALL MD.

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . THIS IS A WATER-BASED PRODUCT. WILL NOT
SUPPORT COMBUSTION.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:ABSORB SPILL W/ANY ABSORBENT MATERIAL -
SAWDUST, SAND, CLAY, ETC, & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROD IS STABLE UNDER NORMAL USE &
STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP FROM
FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY.

Respiratory Protection:USE OF NIOSH/MSHA APPROVED MASKS DURING
APPLICATION TO AVOID EXCESSIVE INHAL OF VAPORS IS HIGHLY
RECOMMENDED. OPEN WINDOOW & DOORS/USE OTHER MEANS TO ENSURE FRESH
AIR ENTRY DURING APPLICATION & DRYING .
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HANDLING &
APPLICATION OF THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL
TIMES.
Protective Gloves:BUNA N, IF REQD, TO PVNT RPTD/ (SUPDAT)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
HANDLING THIS PRODUCT.
Supplemental Safety and Health
PROT GLOVES:PRLNG CONTACT.

HCC:N1
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.4 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE PAINT - SLIGHT AMMONIA SMELL.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & ALKALIS & MATERIALS THAT REACT W/WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS, IN 55-GAL METAL DRUMS & DISPOSE IN APPROVED
DUMPSITE I/A/W PRESCRIBED FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.